Standard Epoxies

Laminating Epoxies

PRO-SET® Laminating epoxies are a versatile system of liquid resins and hardeners designed to meet a wide range of wet lay-up laminating applications.

PRO-SET Laminating epoxies are used to produce lightweight, high-performance composite structures that will withstand long-term cyclic loading in the harshest environments.

These epoxies develop excellent physical properties at room temperature and may be post-cured for enhanced performance. Other features include:

  • Ability to bond to many different types of core materials
  • including wood, metal and all reinforcing fabrics
  • Excellent moisture resistance
  • Superior resistance to heat
  • Superior resistance to fatigue

AN EXTENSIVE RANGE OF RESINS AND HARDENERS

PRO-SET Laminating Epoxies
Choose one of four PRO-SET resins by viscosity
Low Viscosity Laminating Resin LAM-125
Medium Viscosity Laminating Resin LAM-135
Thixotopic Laminating Resin LAM-145
Choose one of four PRO-SET Hardeners by cure speed
Fast Laminating Hardener LAM-224
Medium Laminating Hardener LAM-226
Slow Laminating Hardener LAM-229
Extra Slow Laminating Hardener LAM-237

HARDENERS MAY BE BLENDED FOR TARGETED CURE TIME

MATCH THE CORRECT RESIN TO YOUR EXACT REQUIREMENTS

This guide compares the typical physical properties. These test specimens are cured at room temperature to gelation and at 82°C for eight hours, unless otherwise noted. Neat epoxy samples are used for testing. These are typical values, not to be construed as specifications.

Property Standard  units LAM-125
Resin¹
LAM-135
Resin¹
LAM-
145
Resin¹
Mix Ratio by Volume R:H 3:1 3:1 3:1
Mix Ratio by Weight R:H 3.5:1 3.5:1 3.5:1
Mixed Viscosity @25℃ ASTM D2196 mPas 449-616 904-1705 1495-2059
Mixed Viscosity @22℃ g/cc 1.16 1.17 1.17
Shear Thinning index ASTM D2196 RPM Rotation 1.37
Compression Yield ASTM D695 MPa) -96 -101 -101
Tensile Strength ASTM D638 MPa -70 -74 -75
Tensile Modulus ASTM D638 GPa -3.19 -3.19 -3.19
Tensile Elongation ASTM D638 % -5.6 -6.2 -6.2
Flexural Strength ASTM D790 MPa -124 -128 -128
Flexural Modulus ASTM D790 GPa -3.12 -3.03 -3.03
Tg Ultimate via DMA² ASTM E1640³ >89 >102 >102
Tg Ultimate via DSC with
LAM-251-HT Hardener²
ASTM E1640³ 135 142 142

As of press time, TBD values are undergoing testing.
¹Average of properties for combinations with LAM-224, LAM-226, LAM-229 and LAM-237 Hardeners.
²LAM-151-HT Resin/LAM-249-HT Hardener cured @ 60°C × 2 hours + 150°C × 4 hours.
³Additional post cure may be required; contact us for details.
41 HZ, 3°C per minute.

MATCH THE CORRECT HARDENER TO YOUR EXACT REQUIREMENTS

Property Standard LAM-224
Hardener
LAM-226
Hardener
LAM-229
Hardener
LAM-237
Hardener
150g Pot Life @ 25℃ ASTM D2471 13 min 52-59 min 93-100 min 128-163 min
500g Pot Life @ 25℃ ASTM D2471 12 min 45-52 min 73-84 min 102-107 min
Approx. working time @ 25℃ 40 min 2-3 hr 4-5 hr 7-8 hr

Hardeners can be blended for intermediate cure times.

DOWNLOADABLE TECHNICAL DATASHEETS

PRO-SET LAM-125 with LAM-224 Fast Cure Laminating Epoxy
PRO-SET LAM-125 with LAM-226 Medium Cure Laminating Epoxy
PRO-SET LAM-125 with LAM-229 Slow Cure Laminating Epoxy
PRO-SET LAM-125 with LAM-237 Extra Slow Cure Laminating Epoxy
PRO-SET LAM-125 with LAM-249 Medium Cure High Tg Laminating Epoxy
PRO-SET LAM-135 with LAM-224 Fast Cure Laminating Epoxy
PRO-SET LAM-135 with LAM-226 Medium Cure Laminating Epoxy
PRO-SET LAM-135 with LAM-229 Slow Cure Laminating Epoxy
PRO-SET LAM-135 with LAM-237 Extra Slow Cure Laminating Epoxy
PRO-SET LAM-135 with LAM-249 Medium Cure High TG Laminating Epoxy

PRO-SET LAM-145 with LAM-224 Fast Cure Laminating Epoxy
PRO-SET LAM-145 with LAM-226 Medium Cure Laminating Epoxy
PRO-SET LAM-145 with LAM-229 Slow Cure Laminating Epoxy
PRO-SET LAM-145 with LAM-237 Extra Slow Cure Laminating Epoxy

DNV GL Approval. PRO-SET LAM-125 and LAM-135 resins with LAM-224, LAM-226, LAM-229 and LAM-237 hardeners combinations have all been awarded Type Approval by DNV GL.